Best Seller
互锁砌块钢模板（Lego 式）
用于生产带方锥凸台互锁混凝土挡墙块的成套钢模板。
Interlocking block mould, blue painted finish 查看详情
Best Seller
平板钢模板
用于墙体与板类的模块化平面钢模板，配快接夹具。
Flat formwork panels with clamp connections 查看详情
Best Seller
四脚消波块钢模板
用于防波堤与海岸防护混凝土四脚锥的四脚钢模具。
Tetrapod mould, blue painted finish 查看详情
圆柱钢模板
用于混凝土圆柱、桥墩与立柱的圆形钢模板，直径分段可调。
Cylindrical column formwork, blue painted 查看详情
水槽钢模板
用于预制灌溉渠与排水渠的 U 型及矩形钢模具。
Channel moulds with quick-release cores 查看详情
箱涵钢模板
用于综合管廊与排水预制箱涵的钢模板。
Box culvert mould with adjustable core 查看详情
箱梁钢模板
用于预制箱梁的钢模板，含内模与加强骨架。
Box girder mould with internal formwork 查看详情
检查井钢模板
用于预制检查井与井筒的圆形、方形钢模具。
Round inspection well mould 查看详情
圆柱钢抱箍
用于圆柱的半圆钢制卡箍模板，法兰螺栓紧固。
Steel clamp hoop formwork, blue painted 查看详情
路沿与防撞栏钢模板
用于预制路沿石、中央分隔带与防撞栏的钢模板。
Curb / barrier mould with trapezoidal profile 查看详情该分类下暂无产品。
Not sure which mould fits your project?
把图纸发来，我们的工程师会匹配模具并在数天内报价。标准型号：7–10 个工作日。
常见问题 questions
How do I know which formwork product I need?
Match the mould to the structure you cast most, then to the number of repeats. Drains, culverts and channels use box or channel moulds; bridge work uses pier, capping beam and T-beam moulds; roadwork uses curb and barrier moulds. Tell us the unit and the quantity and we will point you to the right group.
Do you only make the products listed here?
No. The ten product lines cover the common precast units, but most orders are custom and start from a drawing — a PDF, DWG or dimensioned sketch is enough. We confirm the frame layout, insert positions and lifting points before any steel is cut.
What is the minimum order quantity?
There is no minimum order quantity. A single set is enough to start a trial run, which is how most first orders with a new customer begin.
What steel and panel thickness do you use?
Q235B or Q355B, with mill certificates available on request. Panels are 4, 5, 6 or 8 mm depending on pour pressure and the reuse life you need: a 4 mm panel gives 60-90 casts, and a 6 mm panel gives 120-180.
How long does production take?
Generally 25-40 days for a standard geometry and 45-70 days for multi-cell or non-standard work. Panels are assembled on a jig and the casting face is checked before dispatch, and every mould ships with test reports, a packing list and a loading plan for 20 ft or 40 ft containers.