We build 2 moulds in this group: Formwork baja silinder and Formwork klem baja. Every one is made from Baja karbon Q235 with 3–6 mm panels, welded on a jig and checked against the casting face to ±0.5 mm, then built to your drawing. Typical applications: Bridge piers, Building columns, Pillars, Circular columns, Industrial pillars. There is no strict MOQ — one set is enough to start a trial run.
Bekisting Baja Silinder
Bekisting baja melingkar untuk kolom, pier, dan pilar beton dengan segmen diameter dapat disesuaikan.
Cylindrical column formwork, blue painted Lihat detail
Bekisting Klem Cincin Kolom Bulat
Bekisting klem baja setengah lingkaran untuk kolom bulat dengan flens pengencang baut.
Steel clamp hoop formwork, blue painted Lihat detailPertanyaan yang sering diajukan
What diameters can you supply?
Any diameter per drawing, typically 300–2500 mm; larger sections are built as multi-piece shells with additional stiffening rings.
Can I use one set for different diameters?
Yes — diameter segments can be combined within a family, and height is extended by stacking shells.
What column heights can it handle?
Shells are sized to the pour pressure of your tallest column; stacking height is unlimited as long as the flange bolts are specified accordingly.
How is the joint sealed?
Flange faces are machined and closed on a sealing strip, so grout loss at the joint is controlled.
Grup produk lainnya
Blok beton · Dinding · Saluran · Gorong-gorong kotak · Jembatan · Utilitas · Jalan · Semua produk